Posted: Sun Sep 23, 2007 2:47 pm
Hello again
After several false starts I finally began to get on top of colouring this one when I began by setting the floor to neutral.
This was the starting point.
I noticed that the statues were still not red and so deleted the neutral pin and nudged the curve zero crossing point to make the statues as red as possible.
The main adjustment was the b channel.
This adjustment also improved the detail on the top of the statues.
The final stage was finalising the L channel.
I had determined that I needed to set the crossover in the b channel to -13/0. My hand seemed to slip as I ended up with -14/-1. Near enough I thought.
I'm sending a 100% view as well as the normal screenshot.
Regards
After several false starts I finally began to get on top of colouring this one when I began by setting the floor to neutral.
This was the starting point.
I noticed that the statues were still not red and so deleted the neutral pin and nudged the curve zero crossing point to make the statues as red as possible.
The main adjustment was the b channel.
This adjustment also improved the detail on the top of the statues.
The final stage was finalising the L channel.
I had determined that I needed to set the crossover in the b channel to -13/0. My hand seemed to slip as I ended up with -14/-1. Near enough I thought.
I'm sending a 100% view as well as the normal screenshot.
Regards