Winter returns for a while.....

This board is for the January 2009 Curvemeister 101 class.
ggroess
Posts: 5342
Joined: Wed May 24, 2006 2:15 am
Contact:

Postby ggroess » Sat Feb 21, 2009 4:28 pm

Good morning
This morning I awoke to 4 inches of fresh new snow....and a problem....
See if you can figure out which problem was more difficult. The snow removal or the color correction....

Greg

kessi
Posts: 210
Joined: Thu Sep 04, 2008 1:07 pm

Postby kessi » Sat Feb 21, 2009 5:50 pm

You might be tired of your snowfall but I wouldn't mind some right now. Our weather has been rather warm.
Enjoy the shoveling.

kessi

mikemeister_admin
Posts: 4927
Joined: Fri Sep 20, 2013 8:29 pm

Postby mikemeister_admin » Sat Feb 21, 2009 8:05 pm

Maybe three problems in the picture?
1) Picture itself?
2) Rust (has shaft loosened?)
3) Wet snow, means heavy!

Here is a fix to 1). Done withe BTN correction and extra contrast curve i Lab.
Who will fix the other issues?
Thomas

ggroess
Posts: 5342
Joined: Wed May 24, 2006 2:15 am
Contact:

Postby ggroess » Sat Feb 21, 2009 9:18 pm

3) The snow was actually very light and fluffy..I almost went for the high contrast texture photo but thought better of it...
2) My 20 Year old shovel has loads of character and 3 handles in it's lifetime...
1) not too bad of a correction but the highlights are a bit to far...BTN was a great choice for this image...But...you clipped the highlights...

Greg

mikemeister_admin
Posts: 4927
Joined: Fri Sep 20, 2013 8:29 pm

Postby mikemeister_admin » Sat Feb 21, 2009 10:59 pm

I had to go back and do a blu-ectomy,we''ll see how it transmits.Top picture has 20 amount,20 radius sharpening.The rust reminds me of my snowblower.

ggroess
Posts: 5342
Joined: Wed May 24, 2006 2:15 am
Contact:

Postby ggroess » Sun Feb 22, 2009 5:28 am

Greg,
believe it or not you are very close...
The solution is to take the second image into LAB and make 2 small adjustments....

Greg


mikemeister_admin
Posts: 4927
Joined: Fri Sep 20, 2013 8:29 pm

Postby mikemeister_admin » Sun Feb 22, 2009 12:12 pm

I agree it was bit overexposured. Did it in the end with contrast curve:( Could I have redone it?
Here is a new try. Had to compromise a bit.
Thomas

ggroess
Posts: 5342
Joined: Wed May 24, 2006 2:15 am
Contact:

Postby ggroess » Sun Feb 22, 2009 3:57 pm

Thomas,
I see some odd green in the shovel mixed in with the browns...
This one is about compromise...see if you can find a spot where the snow looks reasonable yet the shovel keeps it's color.

Greg

mikemeister_admin
Posts: 4927
Joined: Fri Sep 20, 2013 8:29 pm

Postby mikemeister_admin » Sun Feb 22, 2009 9:39 pm

I made a mistake and thought snow should be balanced. Seems shaft is best neutral and some warm light in picture. Took my previous picture and tried to adjust it.
Thomas
PS too warm:(  No time, packing for journey.Ds

ggroess
Posts: 5342
Joined: Wed May 24, 2006 2:15 am
Contact:

Postby ggroess » Sun Feb 22, 2009 9:57 pm

It's quite alright Thomas...

You might want to start over rather than try to salvage the image from here..it is getting pretty mixed up...

Greg


Return to “Curvemeister 101 January 2009”

Who is online

Users browsing this forum: No registered users and 5 guests