julie tassels

This is the Forum Board for posting to the July 2012 Class
imported_julie
Posts: 464
Joined: Mon Aug 03, 2009 9:41 am

Postby imported_julie » Tue Aug 14, 2012 8:37 am

Hi

did the exercise.
I could not get rid of the red shadows on the counter. Gave up in the end.
decided to boost the colour a bit
Went back in to rgb and corrected by the number - no screen shot
Then went into lab for colour boost.
I tried to protect the neutral I had set by placing another neutral in the same spot in lab.
Dont know if this is the way to do it or not
Then I pinned the place where the red was reflected on the counter
Then boosted
Final was sharpened a little as well.

Its nearly spring and it was a sunny day here :)

Julie

Julie
Attachments
tassels1-jpg
tassels1-jpg (999 Bytes) Viewed 5536 times
tassels2-jpg
tassels2-jpg (999 Bytes) Viewed 5536 times
tassels3-jpg
tassels3-jpg (999 Bytes) Viewed 5536 times
tassels4-jpg
tassels4-jpg (999 Bytes) Viewed 5536 times

ggroess
Posts: 5342
Joined: Wed May 24, 2006 2:15 am
Contact:

Postby ggroess » Tue Aug 14, 2012 11:28 am

The red tinge is due to the hardness of the mask...remember we need to let some of the edges be soft to blend the adjustment across those transitions.

Greg

imported_julie
Posts: 464
Joined: Mon Aug 03, 2009 9:41 am

Postby imported_julie » Wed Aug 15, 2012 3:07 am

Hi Greg

ok, I had another go.

all I have done is use a mask.
I made is less steep and It seems to have reduced the red
Good enough or try more?

Julie
Attachments
tasselstake-2-copy-jpg
tasselstake-2-copy-jpg (233.06 KiB) Viewed 5536 times

ggroess
Posts: 5342
Joined: Wed May 24, 2006 2:15 am
Contact:

Postby ggroess » Wed Aug 15, 2012 11:13 am

I think it's reasonable...
good job...

Greg


Return to “Curvemeister 101 - July 2012”

Who is online

Users browsing this forum: No registered users and 1 guest