Image with midtones only (no blacks or whites) Curvemeister Process??

Got a Photoshop or Elements question? This is the place to get it answered.
mikemeister_admin
Posts: 4927
Joined: Fri Sep 20, 2013 8:29 pm

Postby mikemeister_admin » Mon Oct 23, 2006 12:01 am

Thanks Barry, I always use black left, white right. That way I don't get confused.
Thanks Joe S

-default
Posts: 1916
Joined: Thu Mar 26, 2015 1:53 am

Postby -default » Sat Jun 23, 2007 6:50 am

CM also has a diamond shape in the margin of each curve that you can click on to change the orientation

mburke
Posts: 13
Joined: Fri Aug 01, 2014 5:04 pm

Postby mburke » Tue Aug 12, 2014 12:30 pm

I ran across this post and because I am new to CM I thought I'd give it a try. Here is a screen grab with the lab graphs I used. I am really enjoying learning CM

Mike
Attachments
screen-grab-2-jpg-7
screen-grab-2-jpg-7 (259.42 KiB) Viewed 10184 times

ggroess
Posts: 5342
Joined: Wed May 24, 2006 2:15 am
Contact:

Postby ggroess » Tue Aug 12, 2014 12:50 pm

Hi Mike,
Glad you are enjoying CM. 
One of the traps that LAB can set for you is saturation.  Be careful that you do not create colors that cannot be accurately shown in prints or on the monitor.  Just as you can blow out a highlight you can over saturate in LAB very fast. 

Try the saturation threshold feature of the HSB color space.  If you click on the edge of the curve frame and slide on the 100% side and move the endpoint the overlay masking will show you where you are saturated over 100%. 

I'm not saying you over saturated the Red in the posted image but you are getting close.  The saturation threshold feature is one way to quickly check to see if you are over the top.

Greg

mburke
Posts: 13
Joined: Fri Aug 01, 2014 5:04 pm

Postby mburke » Tue Aug 12, 2014 2:21 pm

Great tip - Thanks

mburke
Posts: 13
Joined: Fri Aug 01, 2014 5:04 pm

Postby mburke » Tue Aug 12, 2014 2:38 pm

I came down to 96 on Saturation and 96 on Brightness. The reds stayed the same but the overall picture darkened a little. Very nice. Thanks again.


Return to “Questions about Photoshop and Elements”

Who is online

Users browsing this forum: No registered users and 4 guests