Update not working (correctly)?

Have an installation or other curvemeister related problem? Ask your question here and it shall be answered.
pedroluis
Posts: 3
Joined: Wed Mar 04, 2009 7:01 am

Postby pedroluis » Wed Mar 19, 2014 9:06 am

Your newsletter august 2013: The easiest way to upgrade is to use the upgrade command, available from Start>All Programs>Curvemeister.com>Check for Updates.

No. This is somewhat corrupted. See screen dump of pop up message attatced.
Attachments
curvemeister-update-failes-jpg-5
curvemeister-update-failes-jpg-5 (999 Bytes) Viewed 7514 times

ggroess
Posts: 5342
Joined: Wed May 24, 2006 2:15 am
Contact:

Postby ggroess » Wed Mar 19, 2014 12:21 pm

I'll forward this onto Mike Russell.  You might want to down load the latest build from this forum link

http://www.curvemeister.com/forum/index.php?action=downloads

Greg

-default
Posts: 1916
Joined: Thu Mar 26, 2015 1:53 am

Postby -default » Thu Mar 20, 2014 1:14 am

Yikes - this is normally a function of the folks who provide the installer - I wonder if they are off the air.

Thanks for the note.  In this case, the updater does not need to be updated, so the rest of the install should be fine.


Return to “Curvemeister Support”

Who is online

Users browsing this forum: No registered users and 8 guests