CM201 Discussion Group is opening up to general discussion

Postings related to the semi-weekly discussion group.
gregmeister_admin
Posts: 645
Joined: Fri Sep 20, 2013 8:26 pm
Contact:

CM201 Discussion Group is opening up to general discussion

Postby gregmeister_admin » Thu Sep 28, 2017 5:45 am

Everyone,
The CM 201 discussion group is a small group of CM users that have been meeting every other week or so for about 4 years. We have been working in a members only area of the forum and therefore have been hidden from the general views. During our conference calls we discuss each others work and techniques and we have gently pushed each other to go further with our photography.

Recently, it was decided by the group that we would open the doors and begin using the public area of the forum to foster greater discussion and general involvement.

It is in that mindset that we will begin...

I will be moving some of the past postings from the CM201 board out to this forum so that you may look into what we are doing and join us in a larger discussion of Photography and art. As a group we have not limited our discussion to Curvemeister within the context of the group and we do not feel the need to limit it here.

Feel free to post, comment and discuss. Join in and Join us in discussing Photography.
Greg
Seeing is more than meets the eye.

Greg Groess
Curvemeister Instructor

DougS
Posts: 32
Joined: Sun Apr 19, 2015 1:49 pm

Re: CM201 Discussion Group is opening up to general discussion

Postby DougS » Mon Oct 23, 2017 12:20 pm

Excellent, always good to share knowledge.

I use CM on nearly every image.

I'll check back now and then to join the conversation, ask, try answering, etc.

Doug

gregmeister_admin
Posts: 645
Joined: Fri Sep 20, 2013 8:26 pm
Contact:

Re: CM201 Discussion Group is opening up to general discussion

Postby gregmeister_admin » Mon Oct 23, 2017 3:50 pm

You are most welcome to join in Doug...
Greg
Seeing is more than meets the eye.

Greg Groess
Curvemeister Instructor

DougS
Posts: 32
Joined: Sun Apr 19, 2015 1:49 pm

Re: CM201 Discussion Group is opening up to general discussion

Postby DougS » Mon Oct 30, 2017 12:20 pm

Is this the 201 discussion area?
I looked but could only find older 101 discussions.
Or point me to older 201 discussion threads?
Doug

gregmeister_admin
Posts: 645
Joined: Fri Sep 20, 2013 8:26 pm
Contact:

Re: CM201 Discussion Group is opening up to general discussion

Postby gregmeister_admin » Mon Oct 30, 2017 2:46 pm

Doug there are some newer discussions here and we will be moving more threads out of the closed 201 group as time goes on. This is the thread we will be using anything dated 2017 is probably from that group.
Seeing is more than meets the eye.

Greg Groess
Curvemeister Instructor


Return to “Discussion Group”

Who is online

Users browsing this forum: No registered users and 103 guests